Audi Oil Consumption

How do I fix my Audi oil consumption?
The best thing to do to your Audi oil consumption would be to replace some parts when the car gets old. The valve guide seals is a good place to start as it is not that hard to find new ones. However, it is a totally different story when we are talking about Audi. Audi parts are pretty hard to find so we must go to where you bought the car. That is where you will find original parts as it would not be smart to go for parts that came from unreliable sources.


Why does my Audi burn oil?
Burning oil in almost all Audi cars is pretty normal, stated Audi service Melbourne. Of course, it would still depend on how you use the automobile. The outside temperature will also play a factor in burning oil. Good thing, Audi has fixed this problem back in 2009. If you are experiencing this with any of their vehicles, better tell it to them so they will give a logical explanation. It is unfair to experience something like that since you paid a lot of money for the car. On the other hand, if you are driving through unsafe conditions like slippery roads or uphill climbs, then you have no right to complain about burning oil as the vehicle is adjusting to that. Yes, you would want to get your money’s worth for the car. Audi is a well-known manufacturer and they make sure all their cars perform up to expectations. Therefore, burning oil is not something you must worry about when you experience it with their cars.

What is normal oil consumption?
For every 1,500 miles, consuming a quart of oil is considered normal. There are some manufacturers that consider consuming the same amount of oil in 1,000 miles also acceptable. The bottom line is you must never forget to have your oil checked when you see that you have ran at least a thousand miles, You may need to have the oil replaces especially when you are driving a luxurious Audi automobile. It won’t take long to do it anyway and you are going to rest easy knowing the problem has been taken care of until the next time you would need to do it.

What causes excessive engine oil consumption?
There are a lot of things that causes high Audi oil consumption. The first is the interval between oil changes. If you have a service manual, you know you must take your vehicle to have the oil changed every 5,000 miles. If it is a lot farther than that before you do something, then you know that you are not doing it right. High ring float conditions is another thing that could cause high oil consumption. Whatever the cause may be, you must have your vehicle checked so that you will be able to correct it. Consuming a high amount of oil is never good for your vehicle. It won’t be long before you would need to have the oil changed again.

Continue Reading

Synthetic Lubricants

Do you own any automotive and you are yearning for a better lubricating product? Well, in most cases, we try out various products because we are after an excellent performance. Sometimes you might not be satisfied with the conventional oils, and you are looking for a solution. Therefore, if you have not tried out synthetic lubricants, then this is your opportunity. Various kinds of synthetic lubricants are found in the market today. Most people prefer them because of their quality and performance. Therefore, let us look into detail more about synthetic lubricants.


What are synthetic lubricants made of?

Well, to start us off, synthetic lubricants offer your superior performance and protection because it has highly refined base oils than conventional mineral oils. There are two types of lubricants which include: synthetic lubricants which are more prevalent in the market and traditional mineral oils. These two types are extracted from the crude oil .However the difference comes in in the processing. Synthetic oil is more refined, thus making them purer than the other mineral oils and better use for car services. During the processing, more impurities are removed from the crude oil, which enables oil molecules to be tailored to satisfy the demands of modern engines.
Additionally, they are artificially made from chemical compounds such as poly-alpha -olefin, which is a polymer. This chemical compound is used as a base stock in the production of synthetic lubricants. Esters can also be used due to their excellent lubricity.

These synthetic lubricants work best because they can cope with extreme conditions irrespective of which modern engine you are using. They are also free-flowing than the other mineral oils, which makes it very efficient when circulating to prevent wearing of lubricated parts.
It also helps the engine to reach its peak operating efficiency better than the other mineral oils. Additionally, they are eco-friendly because of their refined nature which implies there is less release of hydrocarbons to the environment. Besides, it offers excellent wear protection, viscosity stability, excellent low-temperature flow, improved performance, oxidation, and thermal stability.

What are synthetic oils used for?

Synthetic lubricants are popular than conventional lubricants because of the properties such as outstanding thermal stability, low friction features, wear and tear protection and massive load holding.
Therefore synthetic oils are best in gear oils, metalworking fluids, heat transfer fluids, and compressor oils for providing seal protection. It is also used in reducing component failure and increasing drain intervals.
Additionally, ester-based resistant oils are among the innovative technologies that have been incorporated into different sectors which have brought positive impacts to the synthetic lubricant industry.

What is synthetic grease?

Synthetic grease is a thickening substance that is found in the water-resistant form. They have been widely used in rotating equipment for applications involving loads and speeds extreme synthetic greases are becoming more preferred options for components and bearings since it meets medium duty requirements. Their popularity is fast growing because of their availability in new formulations and products. They are now offered with additional consistencies and viscosities for broader range applications. This type of grease uses silicone which is synthetic lubricants, and it can withstand extreme temperatures.

Therefore most automotive owners prefer synthetic greases for their daily use. It is available widely in the market, and soon it is going to dominate over the petroleum-based lubricants.

Is synthetic oil better?

There have been discussions all over which one is better between synthetic oil and conventional mineral oil. Well, synthetic oil is far much better because it uses high-quality base oils when you compare it to the other oils. The inconveniences that conventional oils had such as losing protective qualities because it breaks down easily, oxidizes and acidify quickly and being less stable have been dealt with by using synthetic oil.
Ideally, synthetic oil provides better protection and engine performance. You will get to enjoy additional benefits such as:-
· It controls oil breakdown
· It combats sludge and deposits build-up
· It offers protection against high temperatures
· It reduces wear


Synthetic lubricants are the ultimate option if you are looking for better performance. Well, Redline Oil is offering a complete range of these synthetic lubricants and fuel additives to ensure you enjoy efficiency gains and stunning levels of protection. A synthetic lubricant will meet your demands whether it is daily motoring, using farm equipment, heavy-duty truck and Earth moving machinery. Therefore don’t miss out on what the synthetic lubricants have to offer.

Continue Reading

How do you use fuel additives?

Fuel additives are the compounds that are majorly formulated to enhance the efficiency and quality of fuels that are used in various automotive. They uplift fuel octane, act as lubricants and corrosion inhibitors hence facilitating higher compression ratios for greater power and efficiency. Well, they help in avoiding weak acceleration, rough idling, stalling, and stumbling.

These fuel additives are available in various forms such as pill, powder or liquid. Apparently irrespective of the form which they are found its ultimate goal is to:

– Act as a biocide

– Remove sludge

– Improve combustion

– Control soot

Fuel additives can be formulated to work with diesel fuels as well as gasoline. It helps in minimizing corrosion within the engine to ease the stress on the Pistons. They can is divided as per their point of application such as -refinery products, distribution system products, and automotive enhancement products.

Why Fuel additives

There are lots of reasons why you need to add some fuel additives to your vehicle fuel tank. They will bring a difference depending on various factors. Therefore by adding fuel additives, it is beneficiary because of the following reasons:

1. It boosts octane levels

Fuel additives are popular because of boosting octane levels. When they are added In the tank they will improve engine performance in terms of efficiency and acceleration.

2. It helps in engine maintenance

Engine maintenance is one of the most productive reasons why you need fuel additives. They promote a healthy engine by preventing the build-up of trace deposits, acting as a lubricant and preventing corrosion. If your car is older you need not worry because fuel additives will reduce carbon levels in the engine valves, clean up fuel injection process and promote even burning of fuel in the combustion chamber.

3. Helps you save money and maximize mileage

Fuel additives help you in saving money because it helps in the utilization of fuel. There will be no fuel that will be wasted as a result of incomplete combustion.

How do you use Fuel additives

Using fuel additives is pretty simple.All you need to do is to identify the type of fuel additive that you need depending on the problem that you need to solve. Once you have done that you need to add the fuel additive into the gas tank of your car and you will get to see the results.

How do fuel cleaners work

Gasoline tends to leave various contaminants in the gas tank. This contaminant will accumulate with time around your pressure regulator, in the fuel lines and at the bottom of your fuel tank. Well, ethanol and carbon are the two leading causes of the deposition in the fuel tanks. The accumulation of this deposit will lead to the poor economization of fuel and poor performance of the engine. Therefore that is why you will require fuel cleaners. Well, fuel cleaners should be used regularly to prevent the formation of deposit and to remove the ones which are already in the system.

Fuel cleaners clean the entire fuel system of a gas-powered vehicle. They clean up fuel injectors, combustion Chambers, carburetors, and intake valves. It helps in dissolving carbon deposits and fuel residue this restoring the lost power and improves the overall performance.

What makes the best fuel injector cleaner

Fuel injector cleaners address fuel injection problems like clogging which can be fixed when cleaned regularly. A good fuel injector cleaner is a red line fuel cleaner that ensures the engine functions optimally. A good fuel injector cleaner is the one that is formulated to use synthetic lubricants because it offers efficiency after cleaning.

Therefore the best Fuel injector should be able to cut down maintenance frequency and improve the overall performance of the engine. Well, you can know if you have a clogged fuel injector which requires cleaning when you feel it’s like your engine doesn’t want to start or you have issues with fuel economy.


Redline synthetic products are the best for improved performance. They offer various products which include fuel injector cleaners. It is your responsibility as a car owner to service your vehicle regularly so that it can save you some maintenance costs. If you become negligent you will realize you will be spending more money fueling your car because of clogged valves and poor combustion of fuel.

Additionally, as we have seen fuel additives also boost the efficiency and performance of your vehicle. Even older vehicles can work better if you choose to use such products. They are readily available in the market all you need to do is to be precise with your car needs.

Continue Reading

How to change the engine oil of your car?

Changing your car oil is not something that requires more of your skills since everyone interested can learn and do it at home. Although this is a simple process, you will find that most guys don’t know how to do it, and some are not interested just because getting involved in the process seems to be dirty and ugly.

Changing oil for yourself is essential since it is economical because you can choose the type and the quality of the oil your car can use and avoid buying overpriced products.

How to change the oil?

The following are the required steps you should follow when changing the oil in your vehicle. They are simple steps that need more concentration to avoid frequent leakages and failures in replacing the engine oil with the appropriate one.

·   Find the drain plug.

The drain plug is a nut located at the bottom of the engine under the oil pan. This nut cant is easily reached unless you jack up the car or crawl under to find it. Place the container for drainage of the old oil under the drain plug before opening it.

·    unscrew the drain plug.

Get the unscrewing spanner and loosen the drain plug. When the screw is loose enough, get a rag or a towel to protect your hand as you unscrew it slowly, after which the oil will drain out of your engine to the container.

·   Replacing the oil filter.

Using your hand or a wrench, unscrew the oil filter. Empty the oil from the filter to the container and set the used filter aside for recycling alongside used oil.

Moisten the gasket on the new filter by using the new oil and screw in the new filter to the engine following the instructions given indicated on the filter manual.

· Reinstall drain plug.

Wipe around the place after all the old oil has drained out before you screw in another new oil drain plug. Note that some drain plugs are reinstalled with gasket, so you must make sure you install a gasket before you screw in.

· Pour in fresh oil.

Pour the fresh oil slowly into the oil filler hole using a funnel. Replace the oil filler cap and allow the engine to run for about 30 to 60 seconds then check if there are any leaks from the drain plug. Turn off the engine and check the oil level once more by using a dipstick. Keep adding the oil until it indicates that it is full.

·   Final testing.

Remove the draining container and go round to give a test drive. Then let the oil settle for 10 minutes and check for the last time using a dipstick.

How much can I save by changing the oil on my own?

Changing oil for your own is an easy and economical process. One can save up to $15 by changing oil himself/herself rather than taking the vehicle to the service centre. This is because the material cost for all oil change process may amount to $24 in addition to the oil filter $11, compared to the service centre that charges $30 for an oil change and another $20 for filter replacement.

Can I add oil to my car?

 You can add oil to your car when the dipstick is reading low, to prevent more damages to your car engine. Adding oil does not mean oil replacement. Oil should be added to the same type that your engine manufacturer recommends. The engine oil must be replaced after the engine has covered not more than 5000 km as recommended by experts.

Continue Reading

Crude oil products

What are the different products that come from crude oil?

All petroleum product is derived from crude oil. Petroleum products are crude oil complex mixtures, contrary to petrochemicals which are made of chemical compound collections. The crude oil is converted into several classes of fuel among other petroleum products, according to Engine Oils Melbourne.

Following the different stages in an oil refinery, the most produced petroleum products depend on the market demand. The commonly produced better portions are energy carriers. These involve various classes of fuel oil and gasoline. The fuel is then categorized into volatile and less volatile fuel. The volatile fuel classes are used as jet fuel, petrol for vehicles, diesel, heating oils, among other categories. While less volatile or heavy fuel is used as lubricating oils, paraffin wax, tar among other heavy oils.

The continuous oil refinery then transforms other oil products into useful materials such as plastics products. Petroleum products are also used to manufacture heating gases among other gas products.

The list of the commonly known crude oil products are;

  • Liquid fuel such as diesel, kerosene, petrol, turbine fuel among others.
  • Lubricants such as oils, greases, alongside other lubricants.
  • Bulk tar used in roofing and sealing holes.
  • paraffin wax used to package frozen food.
  • Sulfur which contains organosulphur compounds.
  • Slack wax is used to manufacture candles among other products.
  • Petroleum coke used in the manufacture of electrodes among other solid fuels.
  • Petrochemicals used in chemical industries as polymers among other pharmaceutical products.
  • Gaseous fuel such as propane.

What oil is the best for my car?

Generally speaking, this question lacks its specific answer. This is because a car is designed to use a particular brand of oil as a lubricant, depending on its make and functionality. The oil is categorized based on its weight, to suit the engine mode of operation based on different seasons. The recommended oil based on the quality is determined by testing, recommendation and certification by the American Petroleum Institute, and the starburst symbol indicates that the oil has been verified.

How much oil do I put in my car?

The amount of oil to be put in a car depends on engine capacity. Different vehicles ranging from small cars to big truck have various engine capacities and requires a different volume of engine oils. Putting engine oil to your car also requires you to fill the standard capacity. Putting extra oil can overfill and can damage other parts where oil is not required. While putting less oil may lead to under lubrication and hence engine overheating. This may cause severe problems for your car engine.

Finding how much engine your car needs, you need to read through your car users manual for your car system specifications. Visit the manufacturer’s site or find any other online useful resource that talks about this matter.

What is engine oil usually made of?

Motor oils are mostly made of thicker or heavier petroleum hydrocarbons extracted from crude oil, together with additives that give specific properties. The composition of a regular motor oil consists of between 18-34 carbon atoms per molecule.

The motor oil is an essential component in a vehicle moving parts since it creates a thin film between its viscosity. The viscosity between the metal surface and the film should be high enough to maintain the lubricating film. It should be low enough on its molecules so that it can maintain constant flow around the movable engine parts.

Oil is also made of hydrocarbons that can easily ignite and burn. The lowest the oil flashpoint is, the most dangerous it is. Still, the refinery companies separate the oil from the volatile compounds that give it a low flash point, hence reducing its tendency to burn and thus making it a cooling agent too.

how do we compare different types of oils and fluids in the car?

The best way to keep your car in the desired tune-up is to check fluids, add or change on your own. The key things you need to know is the different types of oil used in different units in your vehicle. This is a simple and inexpensive way of keeping the health of your engine alongside other essential parts such as braking system, steering, clutch, radiator, gearbox, among other components.

Here are a different kind of oil in-car system;

  • Engine Oil: this is the primary lubricant for movable engine parts.
  • brake fluid: this is the kind of liquid that pressurizes and provides power to your braking system.
  • Transmission fluids: These kinds of fluid keeps your transmission lubricated and prevent most of the transmission problems.
  • power steering fluids: this is a kind of fluid that adds power to your steering as it controls the wheels and also acts as a lubricant to steering system movable parts.
Continue Reading